One of the most important things you should know about refinishing hardwood floors is to choose the right products for your flooring. This may seem obvious but you would be surprised at how many people leave this to chance or end up with a product that simply will not work for their wood. If you have your floor refinished you should make sure that the products you use are designed for hardwood flooring. There are several different grades of wood and there are different types of finishes that can be achieved. Knowing the type of wood you have will help you choose the right products.
When refinishing hardwood floors it is important to read up on the specific type of wood you have. For example, oak wood is a bit stronger than pine wood and you do not want to use pine wood when refinishing hardwood floors. You should also pay attention to the grain patterns of the wood. Most homeowners notice dark spots or missing grains in their flooring and are able to identify it as something not right.
If you notice this type of thing in your wood floor, you should consider sanding the floor down and applying an environment friendly finish. You should never refinish a wood floor that has been stained. The stain will not dissolve with the water and will not be removed easily when you do the refinishing process. When you do stain a wood floor, you will need to take special care that you do not leave any streaks.
When you refinish your hardwood floors, you will need to move very quickly. You should always start in the center of the room and work your way out. This is because water can ruin your flooring over time. You should only refinish hardwood floors in areas that have little traffic such as a family room or a kitchen.
You should never seal a floor with a wood preservative. If you have already applied a wood preservative then you should no longer seal your floors with this product. If you must seal the floor with a wood preservative, you need to use 100% wood sealers. You should never touch the wood with your bare hands and you should wear protective gloves.
You should remove all items that could possibly damage the floor before refinishing it. This includes wires, pipes, and caulk. You might also want to remove small items from the bottom of the room so that they do not get caught up with the refinished floor. Removing these things before refinishing will ensure that your floor will look good as it is being refinished.
You should always use the same wood that was used in the original construction of the floor. When refinishing old floors, you need to use a similar wood, or at least a wood that is similar in color. This will ensure that the new color of the floor will blend in properly with the rest of the room.
You should always clean the floor in an even manner. You need to wipe the floor down thoroughly using a damp cloth. You may also want to sweep the floor under a machine that agitates the water into a large stream. You should then rinse everything off of the floor before you apply any finishing materials. Follow these simple tips and you should have no problems finishing your flooring project.
If you are going to stain hardwood then you need to make sure that you buy a brand of stain that will hold up to the type of wood that you have. For example, if you are refinishing pine you will need something that will not hold up to the pine that is inside of it. Follow these tips and you should be able to finish the project and the flooring should last for many years.
If you are going to use a special cleaner on your wood floor then you should follow the directions that are included with the cleaner. Some cleaners can cause damage to the flooring, so you should check the label or look for one that says that it is for hardwood only. Also, before applying the cleaner to the flooring you should spray it onto a rag and work it into a lather. This will help you make sure that it does not ruin the floor. Follow these simple tips and you should be able to get great results.
You will find that these are some simple things that you should know before refinishing hardwood floors. There are many ways that you can go about refinishing your floor but it will help to take some time to figure out which one will work the best. Also, you should check into the different types of flooring and find out what will work best in your home. Make sure that you do this before you start to refinish any flooring so that you will be able to save money. A flooring refinishing can be great if you take the time to find out what you need to know.